|
|
|
You currently have
items in your basket. (Total=)
|
|
|
|
|
|
Needle Valves
|
Precision dosing valves
with a needle assembly to dispense precise dots or very fine beads
of low to medium viscosity adhesives and fluids such as anaerobics,
activators, inks, gels, solvents, lubricants, chemicals and UV's.
Needle seal at tip end prevents dead space for very fast shut off when
dispensing micro dots without drips. Needle valves are
designed to apply micro shots without drips. The valve design is
vertical with fluid flow from the side either by syringe, cartridge or
fluid line feed (from pressure pot). Use black fluid lines or feed
tubing with UV cure adhesives.
|
|
 |
Use our
valve selection guide
page or click
here
for PDF datasheet selection guide. Precision valves will dispense
accurate deposits direct from syringes, cartridges or pressure pots. Valves operate with minimal maintenance, ensuring clean and accurate
dispensing whether used by hand, fixed on a production line or mounted
onto an XYZ robot.
|
TS5420 |
 |
Precision valve
with needle assembly to dispense precise dots or very fine beads
of low to medium viscosity adhesives and fluids such as anaerobics,
activators, inks, gels, solvents, lubricants, chemicals and UV's. Needle
seal at tip end prevents dead space for very fast shut off when
dispensing micro dots without drips. Aluminium version.
Read more... |
|
|
TS5420SS |
|
|
Precision valve
with needle assembly to dispense precise dots or very fine beads
of low to medium viscosity adhesives and fluids such as anaerobics,
activators, inks, gels, solvents, lubricants, chemicals and UV's. Needle seal at tip end prevents dead space for very fast shut off when
dispensing micro dots without drips. Stainless steel version.
Read more... |
|
|
TS5440 |
|
|
Microshot valve
with needle assembly to dispense precise dots or very fine beads
of low to medium viscosity adhesives and fluids such as anaerobics,
activators, inks, gels, solvents, lubricants, chemicals and UV's. Needle seal at tip end prevents dead space for very fast shut off when
dispensing micro dots without drips. Stainless steel version.
Read more... |
|
|
Valve Controllers |
 |
Digital controllers for all dispensing valves.
Adjustable timer control with large display LCD. Adjustable air
pressure. Timer memory feature. Low level pressure alarms. I/O
connection for remote actuation or linking to a PLC. Use the TS250 for
basic control, TS350 if memory storage is required or the TS500R for spray and auger
valves.
Read more... |
|
|
Pressure Pots |
 |
Tanks and pressure pots ranging in size from 500
gram to 19 litre.
Small pots to accept 500 gram bottles of
Cyanoacrylate and Anaerobic adhesives. High pressure tanks to 100 psi.
All supplied with either separate adjustable air regulators or built in.
Available with a range of feed tubing, manifolds and fittings.
Read more... |
|
|
Feed Tubing |
 |
Flexible feed tubing for use with pressure pots,
cartridges, valves and syringes. In 1/4" OD or 3/8" OD. Safe for use to
100 psi and compatible with most liquids, adhesives and solvents.
Smaller bore fluid lines with male to female luer lock for quick
connection to valves and tanks. In clear or black for use with all
liquids and UV cure.
Read more... |
|
|
Fittings |
 |
Fittings for use with metering valves,
pressure
pots, cartridges, syringes and feed
tubing. Luer lock, compression,
threaded, barbed and elbow. In polypropylene, nylon, polyethylene and
stainless steel. Suitable for use with most liquids, adhesive and
chemicals. Low cost solutions for fluid feed and flow. Supplied in sealed packs.
Read more... |
|
|
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
|
| |
 |
|
 |
|
 |
|
 |
|
 |
|
|
Dispensers &
Valve Controllers |
|
Fluid Dispensing
Valves |
|
Consumables
Syringes |
|
Dispensing Needle
Tips |
|
Cartridges &
Dual
Cartridges |
|
| |
|
|
| |
|
Prices are in £ Sterling GBP and exclude VAT which is charged on UK orders at checkout. Orders
are encrypted on a 128 bit secure server for total security. All
personal information and payment details is encrypted on SSL secure
website page. Statements, technical information and recommendations
contained herein are based on test we believe to be reliable but they
are not to be construed in any manner as warrantee expressed or
implied. The user shall determine the suitability of the product for his
intended use and the user assume all risk and liability whatsoever in
connection therewith.
Copyright © 2008 Adhesive Dispensing Ltd. All rights reserved.
|
|
|
