|
|
|
|
|
|
|
Fume Extraction and Filtration Systems
Fume extraction and filtration systems
for a safe working environment when handling adhesives, glues,
aerosols, soldering systems and solvents. Removal and reduction of fumes, vapours,
mists, particles and dust to the Control of Hazardous to Health (COSHH)
regulations 2002 and 2004. Filtration systems recirculate filtered air
safely back into the workplace.
Extraction systems exhaust filtered air via a flexi-duct to the atmosphere.
|
A300S
Filtration System |
 |
A3 size filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders, particles and dust. Units can be used in two positions either
reclined (on back stand) or upright on the work bench. Filtration of
particles down to 5 micron. Carbon fibre filter assists in the removal
of solvent odours. Portable and easy to use system.
Read more... |
|
|
A200S
Filtration System |
|
|
A2 size filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders, particles and dust. Units can be used in two positions either
reclined (on back stand) or upright on the work bench. Filtration of
particles down to 5 micron. Carbon fibre filter assists in the removal
of solvent odours. Portable and easy to use system.
Read more... |
|
|
A200H
Filtration System |
 |
Filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders, particles and dust. A2 drawing boards can be placed into the
hoods at an angle for efficient overspray capture. The hood also
accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto
the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Read more... |
|
|
A100H
Filtration System |
|
|
Filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders, particles and dust. A1 drawing boards can be placed into the
hoods at an angle for efficient overspray capture. The hood also
accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto
the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Read more... |
|
|
T570H-C Filtration System |
|
|
Filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders. Contain and filter for a cleaner, healthier working environment
within dental labs, electronic design and rework, pharmaceutical labs,
education and more. Accommodates prototypes, models, ceramic
parts, PCB’s etc, placed onto the base to be sprayed, soldered, cleaned,
glued.
Read more... |
|
|
TS500S-C Filtration
System |
|
|
Filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders. Contain and filter for a cleaner, healthier working environment
within dental labs, electronic design and rework, pharmaceutical labs,
education and more. Accommodates prototypes, models, ceramic
parts, PCB’s etc, placed onto the base to be sprayed, soldered, cleaned,
glued.
Read more... |
|
|
TS700S-C Filtration System |
|
|
Filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders. Contain and filter for a cleaner, healthier working environment
within dental labs, electronic design and rework, pharmaceutical labs,
education and more. Accommodates prototypes, models, ceramic
parts, PCB’s etc, placed onto the base to be sprayed, soldered, cleaned,
glued.
Read more... |
|
|
A300S-D
Extraction System |
|
|
For air fume extraction and removal of aerosol
paints, lacquers, adhesives (glue booth for Spray Mount) and airbrush
overspray. Solder fume, general solvent vapours and gases extracted to
atmosphere. The A300S-D can also be used in both horizontal and
vertical positions. Accommodates products up to A3 size.
Read more... |
|
|
A200H-D Extraction
System |
|
|
Captures, filters and expels for a cleaner,
healthier working environment. A2 size components can be placed into the
hoods at an angle for efficient overspray capture. The hood also
accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto
the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Read more... |
|
|
A100H-D Extraction
System |
|
|
Captures, filters and expels for a cleaner,
healthier working environment. A1 size components can be placed into the
hoods at an angle for efficient overspray capture. The hood also
accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto
the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Read more... |
|
|
T500S-D Extraction
System |
|
|
Captures, filters and expels for a cleaner,
healthier working environment. The folding PETG shield can be stored if
not required thus reducing the unit footprint considerably. Handling
and/or use of potentially harmful substances takes place in front of the
intake filter area.
Read more... |
|
|
T660H-D Extraction
System |
|
|
Captures, filters and expels for a cleaner,
healthier working environment. A2 size components can be placed into the
cabinet at an angle for efficient fume capture. The hood also
accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto
the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Read more... |
|
|
T930H-D Extraction
System |
|
|
Captures, filters and expels for a cleaner,
healthier working environment. A1 size components can be placed into the
cabinet at an angle for efficient fume capture. The hood also
accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto
the base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
Read more... |
|
|
Adhesive Dispensing Ltd provide a wide range of equipment options and
accessories for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
|
| |
|
|
|
Prices are in £ Sterling GBP and exclude VAT which is charged on UK orders at checkout. Orders
are encrypted on a 128 bit secure server for total security. All
personal information and payment details is encrypted on SSL secure
website page. Statements, technical information and recommendations
contained herein are based on test we believe to be reliable but they
are not to be construed in any manner as warrantee expressed or
implied. The user shall determine the suitability of the product for his
intended use and the user assume all risk and liability whatsoever in
connection therewith.
Copyright © 2008 Adhesive Dispensing Ltd. All rights reserved.
|
|
|
