Designed to dispense medium to viscous
materials fed from syringes, cartridges or pumps. The TS5322 provides
repeat deposits of sealants, silicones, RTV, grease and pastes. TS5322
valves are approximately 4.0" (101.6mm) long and 1.38" (35mm) wide. They
weigh approx. 0.31 lbs (141g). The minimum operating air pressure required
is 70 psi. Flow rates (water) are approx. 2700cc/ml gallons per minute @
100psi (maximum
free flow area is measured without dispense tip adapter, which creates reduced
output area). The minimum shot size for the valve is approximately 0.002 cc/ml
and these valves will cycle up to speeds of 700 deposits per minute. The
viscosity range of fluid is recommended at between 5000 - 1 Million CPS. The
maximum fluid pressure is 500psi. The repeatability is
± 0.2%.
Recommended digital timed controllers for
these valves are the TS250,
TS350 and TS500R.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
Ideal for silicones, sealants, greases, gels
Snuff-back action prevents drips
Handles high viscosity materials
Repeat deposits, lines or potting
Adjustable stroke control for fine tuning
Syringe feed, cartridge or pressure pot
Supplied with hose, input fitting, tip
adapter
Easy bench, machine or robot mount
Control using TS500R,
TS250 or
TS350
Typical materials
dispensed from these valves include sealants, silicones, mastics, RTVs,
pastes, gels, lubricants, flavourings, UV cure gels, fluxes, solder
masks and greases.
Prices are in £ Sterling GBP and exclude
VAT which is charged on UK orders at checkout. Orders are encrypted on a
128 bit secure server for total security. All personal information and
payment details is encrypted on SSL secure website pages. Statements,
technical information and recommendations contained herein are based on
tests we believe to be reliable but they are not to be construed in any
manner as warrantees expressed or implied. The user shall determine the
suitability of the product for his intended use and the user assumes all
risk and liability whatsoever in connection therewith.
