|
|
|
You currently have
items in your basket. (Total=)
|
|
|
|
|
|
|
Recirculatory Fume Filter System
Recirculatory A2 size
filter unit
for aerosol adhesives, lacquers, solvents, paints,
solders, particles and dust. Filtration of
particles down to 5 micron. Carbon fibre filter assists in the reduction
of solvent odours. Easy to use system. Includes fan
with particle and carbon filters. The workstation hood also accommodates
prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base
to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
|
Specification |
|
Part ID: |
A200H |
 |
|
Fan Motor
Spec: |
230V 50Hz
105W |
|
Air Volume
at Free Air: |
325 m3/hr |
|
Air
Velocity at Filter Face: |
0.50 m/sec |
|
Air
Velocity at Hood Face: |
0.25 m/sec |
|
Noise Level: |
59 dB (A)
|
|
Weight: |
20 kg |
|
Lead Time: |
4-5 days |
|
Part
Number |
Description |
Price |
Buy |
|
A200H |
Air Filtration Cabinet Axial Fan and Filters |
£ each |
 |
|
|
Description
Steel construction finished in dove grey –
fan/filter unit mounted onto hood enclosure - particulate filter –
carbon impregnated fibre filter – axial fan(s), external rotor motor
type brushless, UL, VDE and CSA approved - sealed electrical wiring and
switch, downstream of filters.
*110V 60Hz version available if required.
Operation
All WS filtration systems
and extraction systems carry a lifetime warranty, are quiet in operation
and can be assembled in seconds. Place onto a desk, bench or trolley and
then simply plug in and switch on. These units can be used in two
positions.
For artwork applications, standard A2 drawing boards can be placed
within the hood enclosure. The boards fit at an angle for efficient
overspray capture. 3D items, models, printed circuit boards etc. may be
placed onto the hood base for spraying, cleaning, sanding etc. |
 |
|
Filtration
The particulate (intake)
filter is a three stage graduated fibre filter with a high ‘dust’
holding capacity for long life. Filtration to 5 micron particles. NB:
Spray particulate sizes vary from 10 to 20 microns.
The carbon impregnated fibre filter (behind intake) assists in the
reduction of solvent odours. Through the process of filtration,
adsorption and dilution, operator exposure to potentially hazardous
substances is vastly reduced.
These units are designed
predominantly for studio / classroom / workshop cleanliness and for
immediate operator protection from concentrations of airborne
contaminants. They are not recommended for continual usage, i.e.
production applications, particularly in confined and/or badly
ventilated areas. (See extraction cabinets A300S-D,
A200H-D & A100H-D
for complete vapour extraction or TechFlo range for higher specification
filtration).
Demonstrating adequate
control of the risks to the health of employees students and the general
public, from dusts, powders, mists, fumes and vapours is the fundamental
requirement of the Control of Substances Hazardous to Health (CoSHH). |
|
Adhesive Dispensing Ltd provide a wide range of equipment options and
accessories for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies. |
|
Prices are in £ Sterling
GBP and exclude VAT which is charged on UK orders at checkout. Orders
are encrypted on a 128 bit secure server for total security. All
personal information and payment details is encrypted on SSL secure
website pages. Statements, technical information and recommendations
contained herein are based on tests we believe to be reliable but they
are not to be construed in any manner as warrantees expressed or
implied. The user shall determine the suitability of the product for his
intended use and the user assumes all risk and liability whatsoever in
connection therewith.
Copyright © 2008 Adhesive Dispensing Ltd. All rights reserved.
|
|
|
